Powerful acidic descaler to remove poorly soluble mineral impurities Removes stubborn lime residues and lime soap
Good adhesion of the product thanks to the high viscosity, even on vertical
surfaces
Free of hydrochloric and phosphoric acid
Can be diluted with a ratio of up to 1:20
Can also be used in a foam gun
Nonionic surfactants < 5%, organic acids, water-soluble solvents, dyes. pH value (concentrate): < 0.5
pH value (ready-to-use solution): approx. 1
Can be used on acid and water-resistant surfaces and objects in sanitary areas. Acid-sensitive surfaces, such as
damaged chromium coatings on fittings, brass, anodised aluminium, polyamide and acid-sensitive natural and artificial
stone, can be damaged by products containing acid.
Please test on a small inconspicuous spot before first application. Always water joints and fittings beforehand with cold
water. Do not allow the product to dry. Adjacent areas and objects must be protected. Rinse all treated surfaces with
water.
Basic cleaning (toilet bowls):
Spray undiluted product under the toilet rim or onto the surface to be cleaned and clean with the toilet brush. Flush with
water after a short reaction time. Consumption: 10.0 ml/m².
Intensive cleaning (surface cleaning):
250 ml to 4 L of cold water.
Wet the surface with cleaning solution and clean with a cleaning textile. Consumption: 2.0 ml/m².
Basic cleaning (removal of limescale/descaling):
1 L to 10 L of cold water.
Wet the surface beforehand with water. Distribute the cleaning solution on the floor, leave to react for a short time, scrub,
vacuum the dirty solution, rinse thoroughly with water. Consumption: 35.0 ml/m².
Foam cleaning:
Fill the container with undiluted product. Choose a nozzle setting of 1:4 to 1:10 depending on the degree of soiling, work
the foam into the surface and rinse with water after a short reaction time. Consumption: 50.0 ml/m².